How to paint a bathroom the right way?

How to paint a bathroom the right way?

Painting a bedroom or living room is the most common project for the majority of DIY enthusiasts. Putting a minimum effort, you can get the maximum result. Painting your bathroom is also a crucial part of bathroom resurfacing in Sydney.

However, painting the bathroom is slightly different from painting the other areas of your home. This room is generally small and receives lots of water from various sources. To get a beautiful result, it is essential to pay special attention while painting.

To resurface your bathrooms in the right way, follow these below tips.

  • Choose the right colour

Narrow down your colour choices to a few. You can buy colour samples from companies dealing with interior painting in North Sydney and apply large swatches on the wall at a few places. That will help you see how the colour matches and looks at spaces at various times of the day.

  • Gather proper materials

You need a few basic supplies necessary to paint the walls of your bathroom. All you need are a tray, a roller, an angled paint brush, patch, painters’ tape, sandpaper, a tarp for the floor, a flat-head screwdriver, and satin or semi-gloss paint. You can quickly get all these materials from any interior painting in the North Sydneystore.  

  • Pick your type of paint

Bathroom resurfacing in Sydney and painting is comfortable with water-based formulas available in the market. You are free to choose any sheen formulas. However, any satin or semi-gloss formulas are best for areas that are more exposed to moisture. That is because; such paints are formulated to keep the growth of mildew at bay. 

  • Do some preparations work

Use a screwdriver to remove any plates on the light switches or electrical sockets. In the next step, you need to wash down the walls with water and soap. To make horizontal painting an easy affair, you can apply painters’ tape to the baseboard. Try to sand or patch any dings or holes. A tarp is extremely handy for protecting your floors in case of any accidental spills or drips. 

  • Start painting following these easy steps

Start your bathroom resurfacing in the Sydney project by carefully painting the borders. A premium-quality angled brush is perfect for this initial step. You do not need to put a painter’s tape along the vertical edges if the brush and your hand are steady. Once you are done with the edges, start to paint the remaining portion of the wall using a nap roller. That will offer you more coverage and speed.   

Last, but not least

Once the first coat is dry, you need to evaluate whether you need a second coat. A single coat is enough if you see the change of colour is delicate. But, if you know the colour change to be more dramatic, it is time for the second coat.

Painting your bathroom is no doubt a satisfying job once you have the proper supplies, and you can spend a few hours on the job. Finally, you can reach the end and appreciate your hard work.

Leave a Reply

Your email address will not be published. Required fields are marked *